+ DJI Ronin 2

The versatile Ronin 2 gimbal from DJI is suitable for handheld, or mounted in a variety of ways, including to a drone, Steadicam, vehicle mount, and more. This motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds.

Includes:
- Ronin 2
- Ronin Grip/Ring
- 6 Batteries
- Dual Charger
- Universal Mount
- Power Cables for Red and Arri
- Remote Control

+ DJI RS4 Pro

‌Equipped with carbon fiber axis arms, DJI RS 4 Pro boasts a 4.5kg (10lbs) payload capacity as well as robust power and torque, easily accommodating mainstream mirrorless/cinema camera and lens setups. Designed with an all-new horizontal plate, RS 4 Pro enables the second generation of native vertical shooting for further elevated efficiency. Without the need for additional accessories, cinematographers can simply release the horizontal plate and secure it into the vertical position for an effortless switch to vertical shooting.

+ DJI RS3 Pro

Featuring the third generation of RS stabilization algorithms, RS 3 Pro provides significantly enhanced stability in any scenario. RS 3 Pro provides a 20% increase in stability over RS 2, effortlessly managing low-angle shots, running scenarios, or switching between high and low positions. The optimized structural design of RS 3 Pro ensures that its weight remains the same as RS 2 at just 1.5 kg/3.3 lbs (includes gimbal, battery grip, and dual-layered quick-release plates), while its load capacity is a robust 4.5 kg/10 lbs, delivering powerful support in a lightweight body.

+ DJI RS2 Pro

The RS 2 gimbal is a redesigned follow-up to the Ronin-S gimbal with a payload of up to 10 lb. It's about 25% lighter and more compact thanks to monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, although still with a 12-hour runtime. The motors are about 20% more powerful and support cameras such as the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF.

+ Inertia Wheels MAX

The Nodo Inertia Wheels feature low-latency, long range, dual-band, dual-link radios with user customizable drag and inertia. Compatible with Ronin 2 and Movi Pro. Now with the upgraded solid state motors you can enjoy three times the torque, six times the current capacity, and four times the resolution. All this to help you operate to the exacting standards you expect on set.

+Flowcine Black Arm Complete

The Black Arm is a hard mount system for attaching gimbals to vehicles such as cars, ATVs, boats, snowmobiles etc. It is a 3-axis dampening system with an additional vibration mount for stabilizing roll and tilt errors as well as vertical motion and vibrations.

Includes:
- Springs up for payloads up to 42 lbs.
- Tranquilizer Vibration Isolator
- Dual Rail Clamps
- 300mm Extension
- Dual Spring Brackets for heavier payloads

+Rig Wheels Cloud Mount Sidecar Pro

Magnetic vibration isolator for mounting cameras and gimbals to vehicles.

Includes:
- Cloud mount vibration isolator
- Sidecar plate
- (x16) magnets
- (x8) Suction cups

+ Ready Rig GS w/ Pro Arms

Use the Ready Rig GS Stabilizer to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders. By redistributing the load to the user's hips and core, this rig enables you to extend your shooting time and lessens operator fatigue. It also reduces the bounce motion sometimes seen when doing handheld gimbal shots. The Ready Rig GS works with any gimbal in standard or underslung mode. The ReadyRig supports cameras from 1-40 lbs. with the Pro Arms.

+ Easyrig 5 Vario Serene 5" ext

The FLOWCINE Serene is a two-axis spring arm stabilizer that attaches at the end of the Easyrig arm. It smooths video results by mitigating vertical vibrations induced by walking or running during a tracking shot. It also stabilizes side to side motion in similar tracking situations by counter-pivoting around its center axis. The Serene also allows for full use of the Easyrig spring extension for going from high to low mode. Designed for cameras 11-38 lbs.

+ Easyrig 5 Vario Stabil G2

The Easyrig STABIL G2 Stabilization Arm is incorporated into the Easyrig system to make the weight distribution as even and ergonomic as possible, smoothing shots while walking. The G2 features an upgraded locking pin that prevents jitter when locked at 90°.

The Easyrig STABIL G2 can be mounted on your existing Cinema 3 and Vario 5, stabilizing camera configurations from 11-55 lb (5-25 kg).

+ Walter Klassen Gimbal Mitchell Plate

Easily mount your brushless gimbal with the Walter Klassen Gimbal Mitchell Plate. The Gimbal Mitchell Plate quickly pairs with the Tie-Down Knob to affix to a standard female Mitchell mount, or with a Doughty Clamp to affix to speed rails or tubing.

This Gimbal Mitchell Plate is compatible with the Freefly MoVI Toad in the Hole and the DJI Ronin 2’s Universal Mount. For the Doughty Clamp and gimbal accessories option, a MoVI Toad adaptor or Ronin Universal Mount is needed.